Electronics
-
12V DC 1/2 inch Electric Solenoid Water Air Valve Switch (Normally Closed)
₹300.0012V DC Solenoid Water Air Valve Switch?(Normally Closed)?1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project.?There are two (Nominal NPT) outlets.?Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.
The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly,?it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.
-
16*2 (1602) LCD Display with I2C interface – Blue Backlight
₹180.0016×2 LCD Display with I2C ? the perfect solution for seamless integration into your projects. This LCD module, equipped with I2C communication, simplifies connectivity and provides a user-friendly display for your Arduino or other microcontroller-based applications. It’s the perfect solution for adding crisp, clear text displays to your projects with minimal effort.
-
1×2 18650 Battery Spacer Holder
₹35.00Cell Holder 18650 1X1, made of flame retardant ABS+PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, can be combined into many different sizes and shapes of the battery pack; after welding nickel tabs, the pack can pass the vibration test without any other connecting device. Make your battery pack Solid and Reliable!
-
1×4 -18650 Battery Spacer Holder
₹50.00Cell Holder 18650 1X4, made by flame retardant ABS+PC materials, with high-temperature resistance and crack resistance.
There are slots on the edge of the holder, can be combined into many different sizes and shapes of the battery pack; after welding nickel tabs, the pack can pass vibration test without any other connecting device. Making your battery pack Solid and Reliable!
-
2.44 cm (0.96 Inch) I2C 128×64 OLED Display Module 4 Pin
₹200.00OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel display
This 2.44 cm (0.96 Inch)?I2C/IIC 4pin OLED Display Module BLUE can be interfaced with any microcontroller using SPI/IIC/I2C protocols. It is having a resolution of 128×64. The package includes display board, display, 4 pin male header pre-soldered to board.
-
360? Encoder Module for Arduino
₹68.00360 Degree Encoder Module for Arduino ? the precision solution for rotational sensing in your projects. This module, designed to seamlessly integrate with Arduino platforms, offers a range of features for accurate and versatile encoder applications.
-
4 Wheel Smart Car Robot Chassis Kit
₹550.00This is? double layer 4 wheel smart car robot chassis DIY kit. It comes with the four pairs of Geared Motors and Wheels. All the products included in this car kit are quality products. The chassis used in this kit is transparent so as to create dynamic handling of the components mounted on your robotic vehicle.
-
4mm LDR Sensor Photoresistor Photo Cell 5-10K GL4516 with Wire
₹12.00The 4mm LDR Sensor Photoresistor Photo Cell 5-10K GL4516 is an electronic component that detects and measures light levels. It operates using the active voice, meaning it actively senses light rather than being passively affected by it. The sensor is equipped with a 4mm diameter photoresistor, which is a type of resistor that changes its resistance based on the amount of light that falls on it. This resistance range is between 5-10K ohms.
-
-
AD8232 ECG Monitor Sensor Module
₹450.00ECG Monitor Sensor Module is based on AD8232 Analog Device IC. This is a cost-effective ECG Sensor used to measure the electrical activity of the heart. This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading. ECGs can be extremely noisy, out AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal. This sensor can be connected to an Arduino/Raspberry Pi, etc. Sample codes are easily available on the internet.
-
ADXL 335 – Triple Axis Linear Accelerometer
₹500.00ADXL335 is a Breakout board based on 3 axis ADXL335 IC from Analog Devices. The Accelerometer Module require no external devices and works on 5V power supply. It can be directly interfaced to ADC of a microcontroller without any external components.