12V DC 1/2 inch Electric Solenoid Water Air Valve Switch (Normally Closed)

250.00

12V DC Solenoid Water Air Valve Switch?(Normally Closed)?1/2 controls the flow of fluid (liquid or air) and acts as a valve between high-pressure fluid! This liquid valve would make a great addition to your robotic gardening project.?There are two (Nominal NPT) outlets.?Normally, the valve is closed. When a 12V DC supply is applied to the two terminals, the valve opens and water can push through.

The valve works with the solenoid coil which operates electronically with DC 12 volt supply. As it is a normally closed assembly,?it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed.

23 in stock (can be backordered)

Description

Features:

  1. Compact and convenient.
  2. Easily installed and serviced
  3. Precise and reliable.
  4. The installation direction can be arbitrary Angle
  5. Pressure-regulating valve (steady flow valve) function similar to the water flow switch
  6. Not only can it provide a steady flow, but it also prevents the dry burning.
  7. Suitable for fluids like water, oil, air.

Specifications:

Model12V DC 1/2″ Solenoid Valve
Rated Operating Voltage (VDC)12
Rated Current (mA)600
Operation ModeNormally Closed
Power Consumption (Watt)8
Pressure0.02- 0.8Mpa
Energized formsIntermittent
Inlet and outlet DiameterHose barbs for 1/2″ (outer diameter) hose
Dimensions (mm) LxWxHBody: 84 x 57mm (L x H)
Coil size: 34 x 23mm (W x H)
Weight (gm)100
Max fluid temperature100C

* Product Images are shown for illustrative purposes only and may differ from actual product.

Additional information

Weight120 kg
Dimensions100 × 80 × 50 cm
HSIN CODE :-

84818050

Themes By WordPress

Cart
ADXL 335 - Triple Axis Linear AccelerometerADXL 335 - Triple Axis Linear Accelerometer
800.00
×
Nano Board R3 with CH340 Chip Mini-USB Port compatible with ArduinoNano Board R3 with CH340 Chip Mini-USB Port compatible with Arduino
250.00
×
USB A To B Cable - Cable for ArduinoUSB A To B Cable - Cable for Arduino
40.00
×
R307 Finger Print Sensor ModuleR307 Finger Print Sensor Module
1,000.00
×
Current Sensor ACS712 Module AC/DC for Arduino (30A Range)Current Sensor ACS712 Module AC/DC for Arduino (30A Range)
300.00
×
PlaceholderSingle Stand Red Wire
20.00
×
Female To Male Jumper WiresFemale To Male Jumper Wires
350.00
×
PlaceholderTP4056 Charging Module
125.00
×
Female to Female Jumper WiresFemale to Female Jumper Wires
140.00
×
USB A Male to mini B Cable - Cable for Arduino NanoUSB A Male to mini B Cable - Cable for Arduino Nano
40.00
×
NE555 Timer IC DIP-8 PackageNE555 Timer IC DIP-8 Package
20.00
×
LM7805 IC - 5V Positive Voltage RegulatorLM7805 IC - 5V Positive Voltage Regulator

Available on backorder

40.00
×
PlaceholderSingle Cell Holder
15.00
×
DC Pin ConnectorDC Pin Connector
45.00
×
PlaceholderSolar Panel
180.00
×
Cable for ESP 32Cable for ESP 32

Available on backorder

50.00
×
1x4 -18650 Battery Spacer Holder1x4 -18650 Battery Spacer Holder
45.00
×
General Purpose PCB 6X4 inchesGeneral Purpose PCB 6X4 inches
50.00
×
Placeholder3.3 Volt Lithium Battery
90.00
×
Placeholder9 Volt Battery
25.00
×
DC-DC Boost Converter 6-35V to 6-55V Step-UpDC-DC Boost Converter 6-35V to 6-55V Step-Up
200.00
×
AD8232 ECG Monitor Sensor ModuleAD8232 ECG Monitor Sensor Module
450.00
×
General Purpose PCB 4X4 inchesGeneral Purpose PCB 4X4 inches

Available on backorder

40.00
×
RFID Card 13.56 MHzRFID Card 13.56 MHz
20.00
×